Advanced Setup
13
On
NO
Unoccupied Setpoints
O
NC
O
Select sensor operation:
On - read only duct sensor
O - control to duct sensor
Select Dry Contact  
Unoccupied operation:
Unoccupied - when the  
Dry Contact is closed, the  
thermostat will control to the  
Unoccupied setpoints
O -when the Dry Contact is closed, the  
thermostat will turn o.
Dry Contact
NO - Normally Open
NC - Normally Closed
See page 18
Adjust the cooling setpoint 
for unoccupied periods.
(35˚ - 99˚, OF)
Setup
Setup
OUTSIDE
Setup
unoccupied
Setup
COOL
unoccupied
MODE
Press
MODE
Press
MODE
Press
Continued