45MUAAQ: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
9
WIRELESS REMOTE CONTROL
Before you begin using your new unit, familiarize yourself with the remote control. See page 10 through page 14 for more information on these
controls
.
Fig. 5 —Remote Control Functions (RG10F8(2)/BGEFU1)
NOTE: Intelligence Sensor and Vertical Swing functions are not available on this unit.
NOTE: Hold TURBO and
0
C/
0
F buttons for five seconds to lock or unlock the wireless remote controller.
NOTE:
The wired controller and wireless remote cannot be used when a third party thermostat is used.
ON/OFF
Turns the unit on or off.
OK
Use to confirm the selected functions.
TIMER
Set timer to turn unit on or off
TEMP
MODE
Scroll through operation modes
as follows:
AUTO
COOL
DRY
HEAT
FAN
TEMP
Decreases temperature
Humidity
following order:
AU
O
in 1 F (0.5 C) increments.
Min. temperatur
O
e is 60 F(16 C)
O
FAN SPEED
Selects fan speeds in the
Press the TEMP or
to increase/decrease the fan
speed in 1% increments.
20%
40%
60% 80% 100%.
Boo st
LED
Turns indoor unit’s LED display
and air conditioner buzzer on
and off, which creates a comfortable
and quiet environment.
TURBO
Enables unit to reach preset
temperature in shortest possible time.
The selected symbol flashes
on the display area,
press OK to confirm.
.......
( )
Active
clean( )
Increases temperature in
1°F (0.5°C) increments.
Max. temperature is
86°F (30°C).
NOTE: Press together &
buttons at the same time
for 3 seconds to alternate
the temperature display
between the °F and °C.
SET
Scroll through operation
functions as follows:
Active
clean( )
Fresh( )
Sleep( )
Follow Me( )
AP mode
O
LOCK
To Next Page
Loading...
