UNIT OPERATION
I MANUALOPERATION
I
PROCEDURE
f
ON
O
FLAP PAN
" 6:BB
ON!OFF SLEEP
MODE FAN
CLOCK HOUR MINUTE
r-n ©©
oN OFF RESERV CANCEL
FqEJ 0 0
®
ON/OFFbutton
Press this button and COOL operation is indicated.
• A receiving beep is heard.
• The UNIT ON lamp of the indoor unit display lights
on.
2
MODEbutton
Press this button to select the desired operation
mode.
AUTO _ DRY _ COOL _ FAN ---,HEAT
3
FANSPEEDbutton
Press this button to select the desired fan speed.
AUTO _ LOW _ MED _ HIGH
,4
HI' TEMR(AV) buttons
Pressthese buttons to set the desired temperature.
5 FLAP button
Press this button to control the desired air flow
direction.
6 ON/OFFbutton
Press this button to stop the unit operation.
• A receiving beep is heard.
• The UNIT ON lamp of the indoor unit display lights
off.
DRY OPERATION
This operation eliminates moisture economically by operating the compressor, indoor and outdoor fan
motor intermittently, so that the room temperature is maintained at set temperature.
14
To Next Page
Loading...
