Carrier 38MBR - Page 54

38MBR: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
54
DISASSEMBLY INSTRUCTIONS SIZE 48-58 (CONT)
7) Disconnect the fan motor
connectors FAN (3p, white)
and FAN2 (3p, white) from
the DC motor driver board.
8) Remove the fan motor after
unfastening the securing
screws.
2 Panel plate Remove the panel plate.
1) Remove the big handle
screws (2) and the water
collector screws (2).
2) Remove the terminal board
screws (2) and the right-rear
panel screws (7) and remove
the right-rear panel.
Water collector screws
Big handle screws
Right-rear screws
6) Remove the right front side
screw (1) and the right front
side panel.