:
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
11
Select adapter pipes based on downstream indoor capacity. Use the proper tool to cut off unnecessary parts when connecting field pipes.
Table 19 —Adapter Pipe Selection
The branch joint must be installed parallel to the ground. The angle of the joint should be <10°.
A210239
Fig. 18 —Branch Joint Installation
Model Name Gas Side Liquid Side Heat Insulation Material
40VM900031
;
A210234
A210235
A210236
40VM900032
A210237
A210238
A210236
To Next Page
Loading...
