Need help?Do you have a question about the Carrier 40KQM012 and is the answer not in the manual?
General| Type | Split |
|---|---|
| Cooling Capacity (BTU/hr) | 12000 BTU/hr |
| Operating Temperature Range (Cooling) | 18-43 °C |
| Net Weight (Indoor Unit) | 8.2 kg |
| Net Weight (Outdoor Unit) | 22.8 kg |
Details compatible remote control options: IR, Room Controller, and Zone Manager.
Presents the nominal power input for cooling and heating.
Lists the items included with the indoor unit for installation and use.
Specifies the voltage and frequency limits for operation.
Details the parts needed for a complete installation.
Provides essential safety and procedural instructions for installing the unit.
Offers recommendations and positions to avoid for optimal unit placement.
Lists optional accessories available for the indoor unit.
Highlights environmental and positional factors to avoid during installation.
Details crucial warnings regarding refrigerant and condensate pipe configurations.
Explains how to adjust louvres for optimal airflow in heating and cooling modes.
Emphasizes ensuring access for installation and maintenance after unit placement.
Details pre-installation steps, including handling, ceiling dimensions, and insulation.
Describes the process of mounting the unit using hangers and ensuring it is level.
Instructions for creating the wall opening for connecting pipes and cables.
Guidelines for installing the condensate drain pipe for proper water flow and odor prevention.
Steps for attaching the grille and frame assembly to the unit.
Instructions for connecting refrigerant pipes to the unit, including torque specifications.
Detailed steps for properly flaring the ends of refrigerant pipes.
Procedures for checking for leaks and insulating refrigerant connections.
Identifies the various components and terminals on the control panel.
Guidelines for connecting indoor and outdoor units and the main power supply.
Explains the terminal box labels for earth, live, neutral, and communication wires.
Specifies the minimum conductor cross-section for connecting cables.
Illustrates how cables should be routed through the unit.
Details how to connect fresh air intake ducts and deliver air to an adjacent room.
Instructions for directing conditioned air into an adjacent room.
Steps for setting up the fresh air intake, including baffle installation.
Graph showing airflow and static pressure for adjacent room supply.
Guidelines for installing and configuring the fresh air intake fan.
Requirements for supplying conditioned air to an adjacent room.
Step-by-step guide to perform operational tests after installation.
Instructions for configuring addresses for multiple indoor units.
Explains how to interpret fault codes indicated by LED lights.
Lists specific fault codes and their corresponding error descriptions.
Identifies the function of the unit's indicator LEDs (P, Q, R, S).
Details the function and operation of the emergency push-button.
Provides advice for explaining the unit's operation and maintenance to the end-user.
To Next Page