4 Specifications subject to change without notice. OM-40MAHB-01
WIRELESS REMOTE CONTROL
Before you begin using your new air conditioner, familiarize yourself with the remote control.
Fig. 2 — Remote Control Functions
ON/OFF
Turns the unit on or off.
MODE
OK
TIMER
Occupancy Sensor
HUMIDITY
LED
BOOST
ECO/GEAR
Scroll through operation modes
as follows:
AUTO
J
COOL
J
DRY J
HEAT J FAN
FAN SPEED
SWING
Increases temperate in
1°F(0.5°C) increments.
Max. temperature is
86°F (30°C).
NOTE: Press together &
buttons at the same time
for 3 seconds to alternate
the temperature display
between the °F & °C.
TEMP
TEMP
Use to confirm the selected functions.
Use to detect the human
movement in the room to
conserve energy.
Decreases temperature
in
1°F(0.5°C) increments.
Min. temperature is
60
°F (16°C)
Turns indoor unit’s LED display
and air conditioner buzzer on
and off, which create a comfortable
and quiet environment.
Adjust the room humidity during
Dry operation in a range of
35%~85%. Press to increase the
humidity in 5% increments.
NOTE: After setting, the humidity
settings appear on the screen.
Set timer to turn unit on or off
Humidity
Press to enter the energy efficient
mode in the following sequence:
ECO GEAR(75%)
GEAR(50%)
mode ECO
Selects fan speeds in the
following order:
AU
J
J
20%
60% 40% 80% 100%.
J
J
J
Press TEMP or to
increase/decrease the fan
speed in 1% increments.
Enables the unit to reach preset
temperature in shortest possible time.
Boost
Previous setting
SET
Scrolls through operation
functions as follows:
Breeze away( )
clean( ) Fresh( )
Sleep( )
Follow Me( )
AP mode ( ) Breeze
JActive
J
J
J
J
J
J
The selected symbol flashes
on the display area, press
OK to confirm.
away( ) .......
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
To Next Page
Loading...
