Carrier HOME STANDBY ASPBA1CCA016 User Manual

Home Standby - 16kW
Air-Cooled Gas Engine Generator Sets
Continuous Standby Power Rating — 16kW 60Hz
Models: ASPBS1CCA016 (Steel)
ASPBA1CCA016 (Aluminum)
INCLUDES:
• Automatic Transfer
Switch With Built-In 16-Circuit
Emergency Load Center
• Electronic Governor
• Pre-wired External
Connection Box
• Flexible Fuel Line
• Composite Mounting Pad
• Pre-wired conduits
• Natural Gas or LP Gas Operation
• UL 2200 Listed to U.S. and Canadian Standards
Ultra Quiet Mode
Low Speed Exercise
59 dB(A) at 23 feet
 INNOVATIVE DESIGN & PROTOTYPE TESTING are key components of
CARRIER’S success in “IMPROVING POWER BY DESIGN.” But it
doesn’t stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you to
choose CARRIER with the confidence that these systems will provide
superior performance.
 TEST CRITERIA:
>
PROTOTYPE TESTED
>
SYSTEM TORSIONAL TESTED
>
NEMA MG1-22 EVALUATION
>
MOTOR STARTING ABILITY
 SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.
This state-of-the-art power maximizing regulation system is standard
on all models. It provides optimized FAST RESPONSE to changing
load conditions and MAXIMUM MOTOR STARTING CAPABILITY by
electronically torque-matching the surge loads to the engine.
 SINGLE SOURCE SERVICE RESPONSE from Carrier’s dealer network
provides parts and service know-how for the entire unit, from the engine
to the smallest electronic component. You are never on your own when
you own a CARRIER SYSTEM.
 CARRIER TRANSFER SWITCHES. Long life and reliability are
synonymous with CARRIER. One reason for this confidence is that the
CARRIER product line includes its own transfer systems and controls
for total system compatibility.
FEATURES

Carrier HOME STANDBY ASPBA1CCA016 Specifications

General

Brand	Carrier
Model	HOME STANDBY ASPBA1CCA016
Category	Inverter
Language	English

Summary

Product Features and Specifications

Ultra Quiet Mode

Describes the low-speed exercise mode providing 59 dB(A) sound level at 23 feet.

Key Inclusions

Lists essential components included with the generator set.

Core Features Overview

Highlights key design and testing commitments, voltage regulation, and service response.

Home Standby Specifications

Engine Details

Specifications for the OHVI engine, including design, lubrication, and shutdown systems.

Generator Components

Details on the generator's revolving field, skewed stator, voltage regulation, and UL listing.

Transfer Switch Functionality

Information on the automatic transfer switch, its mounting, and UL listing for load management.

Microprocessor Control System

Explains the mode switch, engine start sequence, warm-up, cool-down, and exerciser.

Unit Enclosure and Design

Covers weather protection, critical grade muffler, compact design, and durable paint finish.

Installation System Components

Lists pre-wired connection box, fuel line, mounting pad, conduits, and wire nuts for setup.

Technical Data and Performance

Generator Performance Data

Details rated continuous power, voltage, current, circuit breaker, and sound output.

Engine Performance Data

Information on engine type, cylinders, horsepower, governor system, and fuel consumption.

Control System Functions

Details on mode switch, start sequence, warm-up, cool-down, battery charger, and safety features.

Transfer Switch and Electrical Connections

Transfer Switch & Emergency Load Center Specs

Data on poles, current rating, voltage, pickup/dropout, exerciser, and fault current.

Mechanical Dimensions

Provides height, width, and depth measurements for the unit.

Transfer Switch Features

Highlights electrical operation, contact ratings, transfer time, and enclosure standards.

Terminal Wire Ranges

Specifies wire gauge ranges for ATS, neutral, and ground lugs.

Wiring Diagram and Connections

Illustrates generator ground, transfer switch wiring, and connection box setup.