Carrier 40MAQ - Remote Control Function Buttons; Button Descriptions

4 Specifications subject to change without notice. OM-40MBD-04
FUNCTION BUTTONS
Before you begin using your new air conditioner, make sure to familiarize yourself with the remote control.
Fig. 3 — Remote Controller Function Buttons
NOTE: New remote controller Starting on production of week 41 year 2016 (serial number 4116V10001). For advanced functions refer to the
indoor unit’s service manual.
FRESH
This feature eliminates bacteria,
virus, microbes, and other harmful
substances effectively and refresh
the air.
Scrolls through operation
functions as follows:
Follow Me( ) AP mode
( )
J Follow Me( )...
J
The selected symbol will
flash on the display area,
press OK button to confirm.
Model: RG10B1(B)/BGEF
ON/OFF
Turns the unit on or off.
MODE
OK
TIMER
CLEAN
LED
Turbo
SLEEP
Scrolls through operation modes
as follows:
AUTO J COOL J
DRY J
HEAT J FAN
FAN SPEED
SWING
TEMP
Used to confirm the selected
functions
Set timer to turn unit on or off.
Saves energy during sleeping
hours.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
J
J
NOTE: Holding this button
down for 2 seconds will activate
Silence feature.
Enables unit to reach preset
temperature in shortest
possible time
J
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature(some
units).
TEMP
SET
Inc
reases temperate in
1°C inc
rements.
Max. temperatu
re is 30°C.
Decreases temperate in
1°C increments.
Min. temperature is 17°C.
Used to start/stop the Clean
function.
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (modeldependent), which
create a comfortable and quiet
environment.
Turbo