40MBFAQ: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
35
Check Procedures
Temperature Sensor Check
1. Disconnect the temperature sensor from PCB.
2. Measure the resistance value of the sensor using a multi-meter.
3. Check the corresponding temperature sensor resistance value table (refer to “DISASSEMBLY INSTRUCTIONS” on page 39).
Be sure to turn off all power supplies or disconnect all wires to avoid
electric shock. Operate after compressor and coil have returned to
normal temperature in case of injury.
WA RN I N G
WA RN I N G
To Next Page
Loading...
