Carrier 40MHH - HEAT Mode (Heat Pump Model Only)

40MHH: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
10
HEAT Mode (Heat Pump Model Only)
Fig. 11 — HEAT Mode
1. Press MODE to select the HEAT mode.
2. Set your desired temperature using TEMP  or TEMP 
3. Press FAN to select the fan speed in the range of AU-100%.
NOTE: As the outdoor temperature drops, the performance of your unit’s
HEAT function may be affected. In such instances, we recommend using
this air conditioner in conjunction with other heating.
DRY Mode
Fig. 12 — DRY Mode
1. Press MODE to select the DRY mode.
2. Set your desired temperature using TEMP  or TEMP 
3. Press ON/OFF to start the unit.
FAN Mode
Fig. 13 — FAN Mode
1. Press MODE to select the FAN mode.
2. Press FAN to select the fan speed in the range of AU-100%.
3. Press ON/OFF to start the unit
1
3
2
4
Turbo
1
3
2
Turbo
1
3
2
Turbo