Carrier 40MHH - FUNCTION BUTTONS (HEAT PUMP ONLY)

40MHH: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
5
FUNCTION BUTTONS (HEAT PUMP ONLY)
Before using the new air conditioner, familiarize yourself with the remote control. The following is a brief introduction to the remote control.
Fig. 5 — Remote Controller
NOTE: New remote controller starting production of week 05 year 2021 (serial number 0521V10001). Press the buttons at the same time for 3
seconds to alternate the temperature display between the °F and °C scale. For advanced functions, refer to the RG10B(B1)/BGEFU1 wireless
remote controller’s service manual.
ON/OFF
Turns the unit on or off.
MODE
OK
TIMER
SHORTCUT
CLEAN
LED
Turbo
SLEEP
Scroll through operation modes
as follows:
AUTO J COOL J
DRY J
HEAT J FAN
FAN SPEED
SWING
TEMP
Use to confirm the selected
functions

Decreases temperature
OO
in 1 F(1 C) increments.
Min. temperature is
OO
62 F(17 C).
Increases temperature
OO
in 1 F(1 C) increments.
Max. temperature is
OO
86 F(30 C).
Set timer to turn unit on or off.
Saves energy during sleeping
hours.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
J
J
NOTE: Hold this button down
for 2 seconds to activate the
Silence feature.
Enables unit to reach preset
temperature in shortest
possible time
Use to restore the current
settings or resume previous
settings.
J
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
TEMP
SET
Scroll through operation
functions as follows:
Fresh( )
Follow Me( )
AP mode( ) Fresh ....
J
J
The selected symbol flashes
on the display area, press
OK to confirm.
Use to start/stop the Clean
function.
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
Turbo