40MHH: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
7
FUNCTION BUTTONS (COOLING ONLY)
Before using the new air conditioner, familiarize yourself with the remote control. The following is a brief introduction to the remote control.
Fig. 7 — Remote Controller
NOTE: For models of RG10A4(B1)/BGEFU1, RG10A5(B1)/BGEFU1 and RG10A5(B1)/BGCEFU1, press together and hold the
buttons at the same time for 3 seconds to alternate the temperature display between the °C and °F scales. The FRESH feature is
not available for models of RG10A4(B)/BGEF and RG10A4(B1)/BGEFU1.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
CLEAN
LED
Boost
ECO
Scroll through the operation modes
as follows:
COOL DRY FAN
FAN SPEED
SWING
TEMP
TEMP
Use to confirm the
selected functions.
Starts and stops the horizontal
louver movement. Hold down for
2 seconds to initiate the vertical louver
auto swing feature (some units).
Set the timer to turn the unit on or off.
Press to enter the energy efficient
mode.
Sleep( )
Fresh...
Follow Me( )
AP mode( )
Enables unit to reach the preset
temperature in the shortest possible
time.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
NOTE: Hold this button down
for 2 seconds to activate the
SILENCE feature.
SHORTCUT
Use to restore the current settings
or resume previous settings.
Increases temperature
OO
in 1 F(1 C) increments.
Max. temperature is
OO
86 F(30 C)
Decreases temperature
OO
in 1 F(1 C) increments.
Min. temperature is
OO
62 C(17 F).
Scroll through operation
functions as follows:
Fresh( )
The selected symbol flashes
on the display area.
Press OK to confirm.
Use to start/stop the Clean function.
Turns the indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
creates a comfortable and quiet
environment.
B
oost
To Next Page
Loading...
