41
DISASSEMBLY INSTRUCTIONS (CONT)
Evaporator
NOTE: Remove the front panel and electrical parts (refer to front panel and electrical parts removal steps) before disassembling evaporator.
Procedure Illustration
1) Disassemble the pipe holder located at the
rear of the unit (see CJ_OP_INV_014).
2) Remove the 3 screws on the evaporator
located on the fixed plate (see CJ_OP_
INV_015).
3) Remove the 2 screws on the evaporator
located at the base of the bearing side (see
CJ_OP_INV_016).
CJ_OP_INV_014
CJ_OP_INV_015
CJ_OP_INV_016
Pipe Holder
Screws
Screws
To Next Page
Loading...
