46
STEP3: Advance setting for electric heater control (Optional setting)
NOTE: STEP 3 is optional and should be set if necessary.
Item1:Change of
∆AH- L value by DN (DB)
It is possible to change the following DN setting as an optional function.
Set Data of DN (DB) Comments
0006 Active (Factory setting: 5.4°F)
DN(DB) determines the value of ∆AH- L.
Set Data 0000 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010
∆AH-L (°F) 0.0 0.9 1.8 2.7 3.6 4.5 5.4 6.3 7.2 8.1 9.0
Factory
Setting
40QQ
To Next Page
Loading...
