Need help?Do you have a question about the Carrier 42 HWS 24 and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Type | Heat Pump |
| Cooling Capacity | 24, 000 BTU |
| Power Source | Electric |
| Power Supply | 208-230V/1Ph/60Hz |
Describes procedures for installing the indoor unit of a residential split system.
Guidance on selecting an appropriate location for the indoor unit, considering obstructions and support.
Instructions for drilling an appropriately sized hole in the external wall for unit connections.
Steps for correctly positioning, leveling, and securing the wall mounting plate for the indoor unit.
Details on routing and connecting the condensate drain pipe and refrigerant tubes to the unit.
Instructions for making refrigerant connections to the indoor unit, including torque specifications.
Procedure for correctly flaring the end of the copper tubing for secure refrigerant connections.
Guidance on setting the internal switch for cooling-only or heat pump unit operation.
Specific electrical connection requirements and notes for heat pump models.
Specific electrical connection requirements and notes for cooling-only models.
Steps to configure the unit's system settings using the remote controller after installation.
Procedure for testing the unit's functionality and operation after configuration and installation.
Information for the owner regarding unit operation, remote control functions, and filter maintenance.
Details on the unit's IMQ certification and the systems it applies to.
To Next Page
