Carrier 42DH - Page 17

17
Fig. 24 — 42DV Unit Submittal Drawing
NOTES:
1. Right hand unit shown; left hand unit opposite.
2. All dimensions are ± 1/4 in.
3. Product specifications are subject to changes without notice.
4. Dimensions are in inches (mm).
5. Allow adequate spacing or maneuverability around unit to allow service through recommended access area.
6. C dimension is measured from coil side of unit.
7. Mixing box option will vary return duct dimensions, refer to mixing box drawing.
UNIT
SIZE
FAN
SIZE
DEPTH WIDTH HEIGHT
SUPPLY DUCT FLANGE
RETURN DUCT
FLANGE
AUX.
CTRL.
BOX
UNIT SIDE TO
DUCT
FLANGE
UNIT
BOTTOM TO
DUCT
FLANGE
A B C E F L M N
06 9 x 6 20 28 36-1/2 8-7/8 10-7/8 15-1/8 24-1/4 14 4-1/2 1-7/8 2-7/8
08 9 x 6 20 28 36-1/2 8-7/8 10-7/8 15-1/8 24-1/4 14 4-1/2 1-7/8 2-7/8
10 9 x 6 22 37 39-3/8 10-1/4 10-7/8 21-1/2 33-1/4 15-3/4 0 1-7/8 2-7/8
12 9 x 6 22 37 39-3/8 10-1/4 10-7/8 21-1/2 33-1/4 15-3/4 0 1-7/8 2-7/8
16 10
x 7 22 47 39-3/8 13 12 16-5/8 43-7/8 15-3/4 3 1-5/8 2-7/8
20/22 11 x 10 24 48 45-1/8 16-1/4 13 17-1/8 44-1/4 18 2-1/2 1-7/8 3-1/8
30 12 x 12 28 48 54-1/4 16-1/4 14 16 44-1/4 26-1/2 3-5/8 1-7/8 2-3/4