EasyManua.ls Logo

Carrier 42QZL018DS series - 3 Outdoor Unit Installation; Installation Site Choosing; Outdoor Unit Mounting Dimension

Carrier 42QZL018DS series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB-10
3. OUTDOOR UNIT INSTALLATION
3.1 INSTALLATION SITE CHOOSING
OUTDOOR UNIT
Where it is out of rain or direct sunlight.
Where it is well-ventilated and free from obstacles near the air inlet and air outlet.
Where does not increase the operating noise or vibration of the outdoor unit.
Where does not cause any drainage problem with discharged water.
Install the outdoor unit properly at a place that is durable enough to the weight of the outdoor unit.
Where provides appropriate clearances as outlined
Where the piping between the indoor and outdoor units is within the allowable limits.
In regions with snowfall and cold temperatures, avoid installing the outdoor unit in areas where it can be covered by
snow. If heavy snow is expected, a field supplied ice or stand and field supplied-installed wind baffle should be
installed to protect the unit from snow accumulation and blocked air intake.
When installing the outdoor unit in a place that is
constantly exposed to a strong wind, it is recommended
that a wind baffle be used.
X
O
Strong wind
3.2 OUTDOOR UNIT MOUNTING DIMENSION
W
H
mmmm
W
H
B
A
D
Outline dimension
845 700 320 335
WHD A B
945 810 395 405
938 1369 392 404
024
036
048/060
810 558 310 325
018
560
640
634
549
Model
(38QUS)

Related product manuals