Need help?Do you have a question about the Carrier 42QG18-H and is the answer not in the manual?
General| Cooling Capacity | 18000 BTU/h |
|---|---|
| Energy Efficiency Ratio (EER) | 11.5 |
| Refrigerant | R-410A |
| Compressor Type | Rotary |
| Outdoor Noise Level | 52 dB(A) |
| Type | Split System |
| Air Flow | 850 m³/h |
| Net Weight (Indoor Unit) | 12 kg |
| Net Weight (Outdoor Unit) | 35 kg |
| HSPF Rating | Not available |
| Power Supply | 220-240V, 50Hz |
Highlights critical safety warnings regarding installation and servicing of air conditioning equipment.
Provides guidelines and factors for choosing an optimal installation site for the indoor unit.
Specifies general areas suitable for installing the outdoor unit.
Outlines key factors and constraints for selecting the best outdoor unit placement.
Provides a step-by-step guide for the physical installation of the indoor unit.
Step-by-step instructions for mounting the outdoor unit on wall supports or floor.
Detailed guidance on the proper methods for connecting refrigerant lines.
Instructions on calculating and adding the correct amount of refrigerant.
Covers the crucial steps of cutting, de-burring, and flaring refrigerant pipes.
Procedure for securely connecting refrigerant lines to the indoor unit.
Critical procedure for removing air and moisture from the refrigerant system.
Methods for detecting any leaks in the refrigerant system after connection.
Procedure for conducting test runs in cooling mode, including pressure and current checks.
Procedure for conducting test runs in heating mode, including pressure and current checks.
To Next Page
