GB - 7
42 WHC/WHE
ENGLISH
Installing the hanging panel
Bear in mind the minimum space from the walls to the ceiling (see
minimum space).
Hold the fixing plate to the wall.
Installation panel
Hanging panel with valves
(dimensions mm)
Hanging panel without valves
(dimensions mm)
Holes for fixing panel
Passage holes for connection pipes
Passage hole for electric control cables
Passage hole for condensate drain pipe
Level the plate with a plumb line or spirit level and mark the 4 holes
to be made.
Drill and fix the plate to the wall (No. 4 anchors).
Check that the plate is fixed correctly (No. 4 screws) to prevent any
vibration.
Water connections
NOTE:
Make certain the pipe insulation reaches as far as the valve.
The hydraulic fittings are fixed to the hanging panel structure to
prevent breakage when the pipes are connected; we advise
keeping the fittings still using a spanner.
Holes for fixing panel
To Next Page
Loading...
