9
NOTE
• The maximum distance for the infrared
remote control to work properly is 5
metres.
• There must be no objects, for example,
curtains, obstructing the space
between the unit and the remote
control.
NOTE
• Sunlight shinning directly onto the
signal reception area of the unit may
cause difficulties in receiving the
signal emitted by the remote control.
• The remote control must be pointed
towards the device’s signal reception
area when you press the desired
button.
• The electronic control system emits
an acoustic signal (beep) to confirm
the reception of the emitted
message.
Reading on the display or viewfinder
A. Operating mode selection button
B. ON/OFF button – Connect/
disconnect
C. Button for increasing the selected
temperature
D. Button for reducing the selected
temperature
E. Fan speed selection button
F. Customized control button
G. Customized selections button
H. Deflector control button
I. Button for connecting the timer (ON)
J. Button for the daily timer (DAILY)
K. Button for canceling the timer setting
L. Button for disconnecting the time
(OFF)
M. Button for setting the night operating
mode (SLEEP)
N. Button for setting the time
O. Reset button
To Next Page
Loading...
