To Next PageTo Next Page
Need help?Do you have a question about the Carrier 42XQ060 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Weight (Indoor Unit) | 12.5 kg |
| Weight (Outdoor Unit) | 37 kg |
| Type | Split AC |
| Power Supply | 220-240V, 50Hz |
Defines superheat and provides steps to measure and adjust refrigerant load for correct operation.
Explains capillary vs. piston expansion systems and installing the piston kit for higher capacity units.
Provides guidelines for low-voltage electrical installations, cable types, insulation, and maximum distances.
Presents the wiring diagram for the indoor unit with a 220-240V output signal to the compressor.
Provides the wiring diagram for the indoor unit with a 24V output signal to the compressor.
Shows electrical interconnection diagrams for different 42XQ/XQA models (020, 025, 030, 040, 050, 060).
Details configuration items like remote address, heatpump/cooling, unit address, zone, GFD, and auto-restart.
Explains configuring remote address, temp units, operation mode (HP/AC), temp limits, and clock format.
Guide to entering CRC system configuration: Heat/Cool, CNN address, Zone, GFD numbers.
Explains CRC items 10 (modes), 11 (sensor), and 12 (temp units).
