Fig. 3 — Remote Control Functions
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
BREEZE AWAY
CLEAN
LED
BOOST
ECO/GEAR
Scrolls through operation modes
as follows:
AUTO
J
COOL
J
DRY J
HEAT J FA N
FAN SPEED
SWING
Increases temperature in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
Used to confirm the selected
functions.
Decreases temperature
OO
in 1 C(1 F) increments.
Min. temperature is
OO
16 C(60 F).
Starts and stops the horizontal
louver movement. For the units
with vertical louver swing feature,
hold down for 2 seconds to initiate
vertical louver auto swing feature.
This feature avoids direct air flow
blowing on the body and makes you
you feel indulging in silky coolness.
NOTE: This feature is available
under cool, Fan and Dry mode only
Used to start/stop Active Clean
function.
Set timer to turn unit on or off
Press this button to enter the
energy efficient mode in a
sequence of following:
ECO GEAR(75%)
GEAR(50%)
mode ECO
......
Scrolls through operation
functions as follows:
Sleep( ) Follow Me( )
AP mode( )
J
J
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Selects fan speeds in the
following order:
AU
J
J
20%
60% 40% 80% 100%.
JJJ
Press the TEMP or button
to increase/decrease the fan
speed in 1% increments.
Enables unit to reach present
temperature in shortest possible
time. Keep pressing this button
more than 5 seconds in heating
mode to active Fireplace operation.
To stop this feature, keep pressing
this button more than 3 seconds.
Boost
Previous setting
Turns indoor unit’s LED display
and air conditioner buzzer on
and off, which create a comfortable
and quiet environment.
NOTE: HEAT mode is not
supported by cooling only
appliance.
To Next Page
Loading...
