EasyManua.ls Logo

Carrier 48HG016 - User Manual

Carrier 48HG016
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
PC 111 Catalog No. 534-80090 Printed in U.S.A. Form 48/50HG-2T Pg 1 202 10-01 Replaces: 48/50HG-1T
Book 1144
Tab 1a1b6a6b
Controls Operation and Troubleshooting
CONTENTS
SAFETY CONSIDERATIONS
. . . . . . . . . . . . . . . . . . . . . . 1
GENERAL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
MAJOR SYSTEM COMPONENTS
. . . . . . . . . . . . . . .1-11
General
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Main Base Board (MBB)
. . . . . . . . . . . . . . . . . . . . . . . . . . 1
Economizer Control Board (ECB)
. . . . . . . . . . . . . . . . 2
Scrolling Marquee Display
. . . . . . . . . . . . . . . . . . . . . . . 2
Board Addresses
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Control Module Communication
. . . . . . . . . . . . . . . . . . 2
RED LED
GREEN LED
YELLOW LED
Carrier Comfort Network Interface
. . . . . . . . . . . . . . . . 2
Field-Installed Accessories
. . . . . . . . . . . . . . . . . . . . . . 2
SPACE TEMPERATURE SENSOR (T55)
SPACE TEMPERATURE SENSOR (T56)
SPACE TEMPERATURE SENSOR (T58)
SPACE TEMPERATURE SENSOR CALIBRATION
ECONOMIZER
POWER EXHAUST
INDOOR AIR QUALITY
SMOKE DETECTOR
FILTER STATUS
FAN STATUS
ENTHALPY SENSORS
CONTROLS AND FUNCTIONS
. . . . . . . . . . . . . . . . 11-25
Marquee Display Usage
. . . . . . . . . . . . . . . . . . . . . . . . . 11
Clearing Unit Alarms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Service Test
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
OPERATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-31
Unit Control Type (U.CTL)
. . . . . . . . . . . . . . . . . . . . . . . 26
Occupancy Determination
. . . . . . . . . . . . . . . . . . . . . . . 26
Indoor Fan
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Outdoor Fans
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Economizer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Indoor Air Quality (IAQ)
. . . . . . . . . . . . . . . . . . . . . . . . . 27
Power Exhaust
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Compressor Staging
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Heating (48HG Units)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
THERMOSTAT CONTROL
SPACE SENSOR CONTROL
Heating (50HG Units)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
THERMOSTAT CONTROL
SPACE SENSOR CONTROL
Cooling
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
THERMOSTAT CONTROL
SPACE SENSOR CONTROL
Space Temperature Sensor Calibration
and Trim
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Alarm Handling
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
TROUBLESHOOTING
. . . . . . . . . . . . . . . . . . . . . . . . . 31-39
Complete Unit Stoppage
. . . . . . . . . . . . . . . . . . . . . . . . 31
Single Circuit Stoppage
. . . . . . . . . . . . . . . . . . . . . . . . . 31
Service Analysis
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Restart Procedure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Alarms and Alerts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Page
DIAGNOSTIC ALARM CODES AND
POSSIBLE CAUSES
Thermistor Troubleshooting
. . . . . . . . . . . . . . . . . . . . . 39
THERMISTOR/TEMPERATURE SENSOR CHECK
Transducer Troubleshooting
. . . . . . . . . . . . . . . . . . . . 39
START-UP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-43
APPENDIX A — CCN TABLES
. . . . . . . . . . . . . . . . 44-52
CONTROL SET-UP CHECKLIST
. . . . . . . . . .CL-1, CL-2
SAFETY CONSIDERATIONS
Installation and servicing of air-conditioning equipment can
be hazardous due to system pressure and electrical compo-
nents. Only trained and qualified service personnel should
install, repair, or service air-conditioning equipment. Untrained
personnel can perform the basic maintenance functions of
replacing filters. All other operations should be performed by
trained service personnel. When working on air-conditioning
equipment, observe precautions in the literature, tags and labels
attached to the unit, and other safety precautions that may
apply. Follow all safety codes. Wear safety glasses and work
gloves. Use quenching cloth for unbrazing operations. Have
fire extinguishers available for all brazing operations.
GENERAL
This publication contains Start-Up, Controls, Operation,
and Troubleshooting information for the 48/50HG rooftop
units. See Table 1. These units are equipped with ComfortLink
controls.
Table 1 — Unit Sizes (48/50HG)
MAJOR SYSTEM COMPONENTS
General —
The 48/50HG single package rooftop units with
electric cooling and with gas heating (48HG units) or electric
cooling and electric heating (50HG Units) contain the
ComfortLink electronic control system that monitors all opera-
tions of the rooftop. The control system is composed of several
components as listed in sections below. See Fig. 1-3 for the
control and power schematics. Figure 4 shows the layout of the
control box, unit, and thermistor and transducer locations.
Main Base Board (MBB) —
See Fig. 5. The MBB is
the center of the ComfortLink control system. It contains the
major portion of the operating software and controls the opera-
tion of the unit. The MBB continuously monitors input/output
channel information received from its inputs and from the
Economizer Control Board (ECB). The MBB receives inputs
UNIT MODEL NOMINAL TONS
48/50HG014
12
1
/
2
48/50HG016
15
48/50HG020
18
48/50HG024
20
48/50HG028
25
48/50HG014-028
Single Package Large Rooftop Units
with
Comfort
Link™ Controls
Question and Answer IconNeed help?

Do you have a question about the Carrier 48HG016 and is the answer not in the manual?

Carrier 48HG016 Specifications

General IconGeneral
BrandCarrier
Model48HG016
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Considerations

Major System Components

Main Base Board (MBB)

The central component of the ComfortLink control system, managing unit operations.

Economizer Control Board (ECB)

Scrolling Marquee Display

Control Module Communication

Carrier Comfort Network Interface

Controls and Functions

Clearing Unit Alarms

Procedure for clearing current and historical unit alarms via the ComfortLink display.

ECONOMIZER CALIBRATION

Procedure to reconfigure the economizer damper to new fully closed/open positions.

Service Test

Operation

Occupancy Determination

Factors determining unit occupancy status: CCN, remote switch, schedule.

Outdoor Fans

Economizer

Indoor Air Quality (IAQ)

Compressor Staging

Heating (48 HG Units)

THERMOSTAT CONTROL

SPACE SENSOR CONTROL

Cooling

THERMOSTAT CONTROL

Troubleshooting

Alarm Handling

Response to alerts (TXXX) and alarms (AXXX), including strikes and shutdowns.

Complete Unit Stoppage

Conditions causing the unit to stop providing heating or cooling.

Alarms and Alerts

DIAGNOSTIC ALARM CODES AND POSSIBLE CAUSES

Detailed descriptions of alarms/alerts, causes, and control actions.

Alert Codes 51, 55 and 59 (Compressor Safety)

Alerts for compressor safety trips due to HPS, internal protection, or wiring.

Alert Codes 51, 55 and 59 (Current Detected After Turnoff)

Alerts for compressor current detected when compressor should be off.

Alert Codes 110, 111, 140 (Loss of Charge)

Alert Codes 126, 127, 142 (High Refrigerant Pressure)

Alert Codes 133, 134, 141 (Low Refrigerant Pressure)

Alarm Code 404 (Fire Shutdown)

Alert Code 408 (Dirty Air Filter)

Alert Code 414 (Economizer Damper Actuator Out of Calibration)

Alert Code 414 (Economizer Damper Actuator Torque Above Load Limit)

Alert Code 414 (Economizer Damper Actuator Hunting Excessively)

Alert Code 414 (Economizer Damper Stuck or Jammed)

Alert Code 414 (Economizer Damper Actuator Mechanical Failure)

Alert Code 414 (Economizer Damper Actuator Direction Switch Wrong)

Thermistor Troubleshooting

THERMISTOR;TEMPERATURE SENSOR CHECK

Procedure for checking thermistor resistance and accuracy.

Transducer Troubleshooting

Procedure for verifying suction pressure transducer accuracy.

START-UP

Appendix A - CCN Tables

Appendix A - CCN Tables (cont)

ECONOCFG (Economizer Configurations)

Configuration parameters for economizer operation, PID, and set points.

IAQ (Indoor Air Quality Configurations)

Settings for IAQ sensor, differential, and lockout values.

SET_PNT (Unit Set Points)

Configuration of various temperature set points for cooling and heating.

ALARMS

List of active alarms and their corresponding point identifiers.

Control Set-Up Checklist

ECON

IAQ

CCN

ALRM

Related product manuals