Carrier 48TJD Series - Page 6

NOTE: Drain plug is shown in factory-installed position.
Fig. 4A — Internal Trap Condensate Drain
NOTES:
1. Dimensions in ( ) are in millimeters.
2. Hook rigging shackles through holes in base rail, as shown in de-
tail ‘‘A.’’ Holes in base rails are centered around the unit center of
gravity. Use wooden top skid when rigging to prevent rigging straps
from damaging unit.
UNIT
MAX
WEIGHT
‘‘A’’ ‘‘B’’ ‘‘C’’
Lb Kg in. mm in. mm in. mm
48TJE/TJF004 510 231
73.69 1872 37.50 953 33.35 847
48TJD/TJE/TJF005 520 236
48TJD/TJE/TJF006 540 245
48TJD/TJE/TJF007 615 279
Fig. 5 — Rigging Details
NOTE: Trap should be deep enough to offset maximum unit static
difference. A 4-in. trap is recommended.
Fig. 4B — External Trap Condensate Drain
3. Unit weights do not include economizer. See Table 1 for econo-
mizer weights.
All panels must be in place when rigging.
6