ROOF CURB, SIZES 018-060
PART NUMBER ‘‘A’’
Flat
CPRFCURB001A01 89 [203]
CPRFCURB002A01 119 [279]
CPRFCURB003A01 149 [356]
NOTES:
1. Roof curb must be set up for unit being installed.
2. Seal strip must be applied as required for unit being installed.
3. Dimensions in [ ] are in millimeters.
4. Roof curb is made of 16 gage steel.
5. Attach ductwork to curb (flanges of duct rest on curb).
6. Service clearance 4 ft on each side.
7. Direction of airflow.
8. Insulated panels: 1-in. thick fiberglass, 1-lb density.
9
To Next Page
Loading...
