6
x
y
1
2
3
4
C00071
DETAIL A
A05161
CORNER WEIGHTS (SMALL CABINET) CORNER WEIGHTS (LARGE CABINET)
Unit 024 030 Unit 036 042 048 060
Total Weight 343 366 Total Weight 433 460 480 492
Corner Weight 1 69 74 Corner Weight 1 87 93 97 99
Corner Weight 2 53 57 Corner Weight 2 68 72 74 76
Corner Weight 3 83 88 Corner Weight 3 104 111 116 119
Corner Weight 4 138 147 Corner Weight 4 174 184 193 198
Rigging Weight 353 376 Rigging Weight 443 470 490 502
Fig. 5 -- 50SD Unit Corner Weights (in Pounds) and Suggested Rigging
B
C
MAXIMUM ALLOWABLE
DIFFERENCE (in.)
A-B B-C A-C
1/4 1/4 1/4
C99065
Fig. 6 -- Unit Leveling Tolerances
OPTIONAL
RETURN
AIR
OPENING
OPTIONAL
SUPPLY
AIR
OPENING
EVAP. COIL COND. COIL
2"
C99096
Fig. 7 -- Slab Mounting Detail
UNIT FALLING HAZARD
Failure to follow this warning could result in personal injury
or death.
Never stand beneath rigged units or lift over people.
!
WARNING
INSTALLATION
The lifting/rigging bracket is engineered and designed to be
installed only on Small Packaged Products. This bracket is to be
used to rig/lift a Small Packaged Product onto roofs or other
elevated structures.
PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal
injury/death or property damage.
Rigging brackets for one unit use only. When removing a
unit at the end of its useful life, use a new set of brackets.
!
WARNING
USE OF RIGGING BRACKET
Field Installation of Rigging
Bracket
1. If applicable, remove unit from shipping carton. Leave top
shipping skid on the unit for use as a spreader bar to prevent
the rigging straps from damaging the unit. If the skid is not
available, use a spreader bar of sufficient length to protect the
unit from damage.
2. Remove 4 screws in unit corner posts.
50SD50SD
To Next Page
Loading...
