Carrier 50ZP042 - Installation Procedures: General; Select and Install Ductwork

1176
[465]
3525
88]
3.5
44]
COND,
COIL_
I
\\\ -
DIMENSIONS IN [] ARE IN INCHES
_3528
[1389]
_35217
[IBIB9]
_537
[211]
O n
REAR VIEW
12950
[50198]
BOTTOM OF UNIT
EVAP. t
//
706
[27
L
889 J
[350]
LEFT SIDE VIEW
UNIT
50ZP06O
80]
REQUIRED CLEARANCETO COMBUSTIBLE MATL.
INCHES [mini
TOP OF UNIT ......................................................................................... 0
DUCT SIDE OF UNIT ............................................................................. 0
SIDE OPPOSITE DUCTS ...................................................................... 0
BOTTOM OF UNIT ................................................................................. 0
NEC. REQUIRED CLEARANCES.
INCHES [mmI
BETWEEN UNITS, POWER ENTRY SIDE .................................... 42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE ......................... 42.00 [1066.8]
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
INCHES [mr:l]
CONDENSER COIL ACCESS SIDE .............................................. 30.00 [762.0]
POWER ENTRY SIDE .................................................................... 30.00 [762.0]
(EXCEPT FOR NEC REQUIREMENTS[
UNIT TOP ....................................................................................... 48.00 [1219.21
SIDE OPPOSITE DUCTS .............................................................. 30.00 [762.0]
LEGEND
NEC National Electrical Code
NOTES:
1. Clearances must be maintained to prevent recirculation of air from outdoor-
fan discharge, with the exception of the condenser coil (36.00 in [914.0 mini. A
removable fence or barricade requires no clearance.
2. Dimensions are in inches. Dimensions in [ ] are in millimeters.
81215
[31199]
BOTTOM OF UNIT
CONTROL BOX AND EVAP C01L
ACCESS PANEL
690
[272]
COMPRESSOR PANELFIELD NTRYTO
o
iioooo-
0
FRONT VIEW 2o772
[I 0540]
UNIT WEIGHT
Ib kg
350 159
_5490
[2161]
Fig. 4--Unit Base Dimensions, 50ZP060
ELECTRICAL CHARACTERISTICS
208/230-3-60, 460-3-80
CENTER OF GRAVITY IN.
X Y Z
385.6 (14.00) 508.0 (20.00) 355.6 (14.00)
\ /
I.D.
RIGHT SIDE VIEW
C00158