Carrier A210174 - Software Update for Series B; Update Software Using Micro SD Card

50
A150179
6.3.7.2. Lockout Count
This setting controls the number of times within an hour that the HPS or
LPS trips before the Geo HP compressor will lockout for four hours.
After the selection is made, touch SAVE.
• Lockout Count: 4 or 2
• Default = 2
A150180
6.3.7.3. Brownout Override
This option controls the low voltage brownout override function in the
Geo HP unit. After the selection is made, touch SAVE.
• Brownout Override: Active or Inactive. Default = Inactive