82
APPENDIX A — PIC 5 SCREEN AND TABLE STRUCTURE (cont)
Power Load Parameters
*Default value is shown only if configurable in this table.
CCN TABLE NAME: POWER_O
PIC 5 PATH: Main Menu Maintenance Menu Power Load Parameters
LINE PIC 5 DESCRIPTION CCN NAME RANGE
DEFAULT
VALUE*
UNIT READ/WRITE
1 VLF Load Current VFD_LOAD amp
2 Percent VFD Load Current amps_p_o %
3 Ground Fault Current gf_amps amp
4 Motor Current Imbalance% mt_imb_i %
5 Motor Actual Frequency MOT_FREQ Hz
6 Motor Target Frequency tgt_freq Hz
7 DC Bus Voltage bus_volt V
8 DC Bus Voltage Reference bus_ref V
9 Load Current Ph 1(U) ld_amps1 amp
10 Load Current Ph 2(V) ld_amps2 amp
11 Load Current Ph 3(W) ld_amps3 amp
12 Actual VFD Speed Per vfd_act %
13 Motor Power Factor motor_pf
14 Motor Kilowatts motor_kw kW
15 Motor Overload motor_ov %
16 Motor Kilowatt-Hours motorkwh
17 Rectifier Overload rect_ov %
18 Inverter Overload inv_ov %
19 VFD Enclosure Temp enc_temp °F
20 VFD Cold Plate Temp cp_temp °F
21 Inverter Temperature inv_temp °F
22 Rectifier Temperature rec_temp °F
23 Shunt Trip Relay Status tripr 0 to 1
24 Precharge Relay Status prechar 0 to 1
25 VFD Run Relay Status vfd_run 0 to 1
26 Precharge Feedback prech_fd 0 to 1
27 VFD Load Factor VFD_FACT
28 VFD Load Current VFD_LOAD amp
29 LR Temp Switch lrtem_sw 0 to 1
30 VFD Alarm Code alm_code
31 VFD Status Word stat_wd
32 VFD Command Word cmd_wd
33 VFD Start Inhibit Status str_inh
34 VFD Appl Digital Output appl_do
35 Safety Stop Status safestop 0 to 1
36 SPD Feedback spd_fd 0 to 1
37 High VFD Current VFDC_HI NO/YES
To Next Page
Loading...
