To Next PageTo Next Page
Need help?Do you have a question about the Carrier Aquasnap 30RAP060 and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Model | Aquasnap 30RAP060 |
| Category | Air Conditioner |
| Language | English |
AeroAcoustic™ fan provides low sound levels for sensitive environments.
High efficiency, quiet compressors, and EXV reduce operational expenses.
Proven design, maintenance-free compressors, and robust construction ensure longevity.
Simplifies installation with pre-assembled pumps, strainer, and flow regulator.
Uses Puron® refrigerant (R-410A), an HFC ozone-friendly refrigerant.
ComfortLink™ controls offer easy monitoring, diagnostics, and operation.
Integrated hydronics and tank placement minimize footprint for easy installation.
Features robust, cost-effective microchannel condenser coils for improved performance.
Details the components and options encoded in the 30RAP model number.
Unit construction and manufacturing are certified to ISO 9001 standards.
Presents full load and IPLV performance data for each unit size.
Details operating weight, chassis dimensions, and tank weights for various models.
Provides data on compressor quantity, speed, capacity, and cooler physical properties.
Specs for condenser fans (type, airflow) and coils (MCHX type, face area).
Details options like Novation coils, sound fans, digital compressors, and controls.
Lists accessories like BACnet, Navigator, storage tanks, and vibration isolation.
Water pressure drop curves for heat exchangers in English and SI units.
Unit pressure drop curves (no hydronic) in English and SI units.
Unit pressure drop curves for single and dual pump hydronic systems in English and SI units.
Performance curves for 1.5-3.0 Hp single/dual pump hydronic packages.
Performance curves for 5.0-7.5 Hp single/dual pump hydronic packages.
Performance curves for 10.0-15.0 Hp single/dual pump hydronic packages.
Pressure drop curves for the accessory storage tank in gpm and L/s.
Diagrams illustrating typical piping for units with and without hydronic packages.
Detailed diagram of the typical piping for the hydronic package.
Covers FLA for fans and electrical data for no hydronic, single/dual point configurations.
Electrical data for single and dual point hydronic packages with various fan and pump options.
Details field wiring, incoming power, SCCR, and compressor electrical data.
Details the ComfortLink microprocessor, control routines, and capacity control.
Lists capacity steps, dual chiller control, dynamic controls, and display features.
Covers safety features like low/high pressure, loss of flow, and abnormal condition handling.
Details temperature reset options and demand limit control using EMM.
Covers EXV function, diagnostic tests, and factory default settings.
How ComfortLink controls enable ice production for thermal storage systems.
Guidelines for chiller placement, clearances, and multi-unit configurations.
Cooler temperature limits, flow rates, bypass configurations, and strainer info.
Variable speed pumping, pump control, fluid loop volume, and tank installation.
Water system cleaning, quality, freeze protection, and coil protection.
Importance of air separation and system design practices.
Overview of chiller system, ratings, compliance, and quality standards.
Details on unit cabinet, condenser fans, and compressor assembly construction.
Information on the cooler (brazed plate) and condenser (Novation® MCHX coils).
Details refrigeration circuit components and unit operating capabilities.
Covers control system, safeties, diagnostics, and fan motor details.
Covers electrical requirements and the chilled water circuit details.
Lists required safeties and details operating characteristics.
Details VFD operation, sensorless control, and interface options.
Covers BACnet, LON, Navigator display, and Touch Pilot display.
Covers Chillervisor, Hot Gas Bypass, EMM, Security Grilles, Vibration Isolation, and Storage Tanks.
Covers freeze protection, special fans, sound reduction, SCCR, service valves, and remote cooler kit.
