To Next PageTo Next Page
Need help?Do you have a question about the Carrier Aquasnap 30RAP030 and is the answer not in the manual?
General| Model | 30RAP030 |
|---|---|
| Category | Air Conditioner |
| Compressor Type | Scroll |
| Refrigerant | R410A |
| Power Supply | 400V/3Ph/50Hz |
| Weight | Not Available |
| Operating Temperature Range (Cooling) | 46 °C |
Highlights quiet operation, installation savings, and efficiency.
Details field-proven design, warranty, and wide operating temperature range.
Describes the comprehensive chilled water circuit and integrated hydronic system.
Explains the benefits of microchannel heat exchanger design for durability and efficiency.
Presents detailed physical data including operating weights and dimensions in English units.
Details physical data, weights, and dimensions in SI units for various models.
Summarizes available factory-installed options for chiller customization and enhanced functionality.
Describes additional accessory options such as hydronic packages, communication modules, and diagnostic tools.
Provides detailed dimensional drawings and clearances for 30RAP010 and 30RAP015 models.
Displays dimensional drawings and required clearances for 30RAP018 and 30RAP030 models.
Offers dimensional views and installation clearances for 30RAP035 through 30RAP060 units.
Presents installation dimensions and clearances for 30RAP070 to 30RAP090 models.
Illustrates dimensions and installation details for the accessory storage tank for unit sizes 010-015.
Graphical data showing water pressure drop across heat exchangers for various chiller models.
Illustrates unit water pressure drop without a hydronic package across different flow rates.
Displays unit water pressure drop for single pump hydronic packages at various flow rates.
Presents unit water pressure drop for dual pump hydronic packages at different flow rates.
Shows detailed pump performance curves including head, flow, NPSHr, and horsepower.
Illustrates pressure drop curves for accessory storage tanks based on flow rate.
Illustrates typical piping and wiring configurations for units with and without hydronic packages.
Presents a detailed diagram of the typical piping for units with hydronic packages, including component legends.
Provides comprehensive electrical data, including voltage, MCA, MOCP, and ICF for different fan and package options.
Lists fan electrical data, including FLA for standard and optional fans across various voltages.
Presents electrical data for pump options, including FLA for different HP ratings and voltages.
Explains the microprocessor's function, control routines, and capacity management strategies.
Details sensor usage, diagnostic display features, and service test capabilities.
Covers chiller operating sequences, start-up, off-cycle, and special modes like ice duty.
Illustrates the typical control wiring schematic, including power, control, and communication connections.
Provides guidance on proper chiller placement, clearances, and acoustic considerations for installation.
Explains configurations for multiple chillers in parallel and series, including software control.
Covers water system cleaning, quality limitations, and recommendations for system maintenance.
Details the benefits and operation of variable-speed pumping systems for energy efficiency.
Lists minimum fluid volume requirements for circulation based on unit size and application type.
Explains cooler fouling factors and freeze protection measures, including antifreeze requirements.
Provides guidance on managing air in water loops through vents and separators for optimal system operation.
Outlines the chiller's system description, AHRI ratings, and quality assurance standards.
Specifies requirements for unit cabinet construction, fan design, and compressor assembly.
Details specifications for the cooler (brazed plate) and condenser (microchannel coils).
Details unit control system components, safeties, diagnostic capabilities, and communication features.
Describes operating characteristics, including ambient temperature limits and entering fluid temperature capabilities.
Outlines electrical requirements and specifications for the chilled water circuit and hydronic package.
Describes special features like low-ambient operation, VFD compatibility, and various optional enhancements.
