Carrier Comfort TC-NHP01-A - Operating the Carrier Thermostat; Setting Heating and Cooling Temperatures

8
OPERATING THE THERMOSTAT
Setting the temperatures for heating and cooling
Your thermostat is installed with the heating set at 68 F and the cooling set at 72 F.
You can use these or change them so your home is as warm or as cool as you would
like it to be. These steps will hold the temperature where you set it.
1. To change the heating temperature, press the mode but-
ton on the left until the screen says heat.
2. Press the up or down button located on the right side of
the display until you reach the desired temperature.
3. To change the cooling temperature, press the mode but-
ton on the left until the screen says cool.
4. Press the up or down button located on the right side of the display until
you reach the d esired temperature.