EasyManua.ls Logo

Carrier CRECOMZR105A00 User Manual

Carrier CRECOMZR105A00
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53480416-01 Printed in U.S.A. Form No. IIK-CRECON-SRT-01 Rev. C Pg 1 1-24 Replaces: NEW
Installation Instructions
Part No: CRECOMZR101A00, CRECOMZR102A00, CRECOMZR103A00,
CRECOMZR104A00, CRECOMZR105A00, CRECOMZR106A00,
CRECOMZR107A00, CRECOMZR108A00
CONTENTS
Page
SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . 1
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ECONOMIZER INSTALLATION . . . . . . . . . . . . . . . . . 4
INSTALLING OPTIONAL HH57LW001 SINGLE
OUTSIDE AIR ENTHALPY SENSOR . . . . . . . . . . 10
Enthalpy Control Sensor Configuration . . . . . . . . . 10
ENTHALPY SETTINGS (ENTHALPY OPTION)
California’s Title 24 High Temperature
Limit Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ECONOMIZER SETTINGS . . . . . . . . . . . . . . . . . . . . . 14
Interface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ECONOMIZERONE
POL 224 ECONOMIZER MODULE WIRING
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FREE COOLING ECONOMIZING
DEFAULT HYSTERESIS SETTING
DAMPER MODULATION DURING FREE COOLING
LOCATION-BASED SHUTOFF SETPOINTS
COOLING STAGE OPERATION
MULTI-SPEED FAN SUPPORT
COOLING DELAY VIA INCREASING FAN SPEED
DEMAND CONTROLLED VENTILATION (DVC)
HIGH HUMIDITY LIMITATION
ANTI-FREEZE PROTECTION
MAT-BASED ANTI-FREEZE PROTECTION
OAT-BASED ANTI-FREEZE PROTECTION
EXHAUST FAN OPERATION
OCCUPANCY INPUT
PRE-OCCUPANCY PURGE
AIRFLOW COMMISSIONING
FAULT DETECTION AND DIAGNOSTICS
FIRMWARE UPDATE
MOUNTING, INSTALLATION, AND WIRING . . . . . . 20
Mounting the Economizer Controller Base
Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Mounting Devices Connected To the Economizer
Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting Peripheral Devices to the Economizer
Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SETUP AND CONFIGURATION . . . . . . . . . . . . . . . . 24
START-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cooling with EconomizerONE System . . . . . . . . . . 29
Heating with EconomizerONE System . . . . . . . . . . 29
APPENDIX A — TROUBLESHOOTING . . . . . . . . . . . 30
APPENDIX B — SEQUENCE OF OPERATION . . . . .31
APPENDIX C — MODBUS ADDRESSES . . . . . . . . . .34
SAFETY CONSIDERATIONS
Installation of this accessory can be hazardous due to system
pressures, electrical components, and equipment location (such as
a roof or elevated structure). Only trained, qualified installers and
service technicians should install, start-up, and service this
equipment.
When installing this accessory, observe precautions in the
literature, labels attached to the equipment, and any other safety
precautions that apply:
Follow all safety codes
Wear safety glasses and work gloves
Use care in handling and installing this accessory
It is important to recognize safety information. This is the safety-
alert symbol: . When you see this symbol on the unit and in
instructions or manuals, be alert to the potential for personal
injury.
Understand the signal words DANGER, WARNING, CAUTION,
and NOTE. These words are used with the safety-alert symbol.
DANGER identifies the most serious hazards which will result in
severe personal injury or death. WARNING signifies hazards
which could result in personal injury or death. CAUTION is used
to identify unsafe practices, which may result in minor personal
injury or product and property damage. NOTE is used to highlight
suggestions which will result in enhanced installation, reliability,
or operation.
CAUTION
PERSONAL INJURY HAZARD
Failure to follow this caution may result in personal injury.
Sheet metal parts may have sharp edges or burrs. Use care and
wear appropriate protective clothing, safety glasses and gloves
when handling parts and servicing air conditioning equipment.
CAUTION
PERSONAL INJURY HAZARD
Failure to follow this caution can result in personal injury and
damage to the unit.
Cover the duct opening as a precaution so objects cannot fall
into the return duct opening. Be sure to remove the cover when
installation is complete.
Vertical/Horizontal Low Leak/Ultra Low Leak
EconomizerONE Accessory for
Small Rooftop Units
Select 3 to 12.5 Tons

Questions and Answers:

Carrier CRECOMZR105A00 Specifications

General IconGeneral
BrandCarrier
ModelCRECOMZR105A00
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Considerations

General Information

Compliance Standards

Covers compliance with California Energy Commission and ASHRAE standards for economizers.

Economizer Installation

Installing Optional Enthalpy Sensor

Instructions for installing the optional HH57LW001 enthalpy sensor for outside air changeover.

Enthalpy Control Sensor Configuration

Details how to configure the optional enthalpy control sensor for various applications.

Economizer Settings and Functions

Interface Overview

Overview of the economizer controller's LCD display, buttons, and mobile application compatibility.

POL 224 Economizer Module Wiring

Wiring instructions for the POL 224 economizer controller used on electromechanical units.

Free Cooling Economizing

Details how the system uses outside air for cooling to reduce compressor runtime.

Damper Modulation During Free Cooling

Explains how the damper modulates based on mixed or outside air temperature during free cooling.

Cooling Stage Operation

Details the economizer's role in controlling the unit's cooling stages based on free cooling availability.

Demand Controlled Ventilation (DVC)

Explains the operation of Demand Controlled Ventilation using a CO2 sensor.

Anti-Freeze Protection

Covers the economizer's protection against freezing conditions based on MAT or OAT.

Fault Detection and Diagnostics

Lists detectable faults and diagnostic information for the economizer system.

Mounting, Installation, and Wiring

Mounting the Economizer Controller Base Module

Instructions for mounting the POL 224 economizer controller base module to sheet metal.

Mounting Peripheral Devices

Information on mounting various peripheral devices like sensors and actuators to the controller.

Setup and Configuration

Start-Up Procedures

Covers initial startup procedures for the economizer system in cooling and heating modes.

Appendix A - Troubleshooting

Appendix B - Sequence of Operation Examples

Appendix C - Modbus Addresses

Related product manuals