Carrier EQT1-4 - Creating New Schedules

Viewing or creating schedules
4 Touch a day to see the schedule(s) for that day.
5 In the screen below, touch a schedule's name or green bar (not the
Effective Schedule
bar) to edit or delete
the schedule. See To create a schedule (page 14) for field descriptions.
NOTES
○ The
Effective Schedule
is the combined result of the day's schedule(s).
○ You cannot edit a schedule's
Type
(Dated, Weekly, Continuous), its
Priority
(Normal or Override), or
whether the schedule is an
ON Schedule
or
Off Schedule
. If you need to change any of these settings,
delete the schedule, and then make a new one.
To create a schedule
1 On the
System
screen, touch
Schedules
.
2 If the controller has multiple control programs that have a time clock microblock, touch the schedule object
that you want to add a schedule to.
3 Touch the plus sign to the right of
Add Schedule
.
4 Touch the
Schedule Name
field, and enter a name.
5 Select one of the following:
•
ON Schedule
for an occupied period
•
OFF Schedule
for an unoccupied period that is to override an ON schedule. For example, a holiday
schedule that is to override a weekly schedule.
6 Touch the
Type
field, then select one of the following:
Select...
To use the schedule...
Dated
For a specified period of time between a start and end date. For example, 7:00 am to
7:00 pm every day between July 1st and July 22.
Weekly
Every week on the specified days. For example, every Monday through Friday, 8:00 am
to 5:00 pm.
Continuous
Continuously between 2 specified dates/times, For example, a non-stop schedule that
starts June 1st at 12:00 am and ends August 31st at 11:50 pm.
Equipment Touch Carrier Proprietary and Confidential CARRIER CORPORATION ©2014
Rev. 4/9/2014 All rights reserved
14