To edit touchscreen settings
If optional languages were defined when the touchscreen file was created, this
screen lets you select which language to use for Equipment Touch system screens.
If custom screens were included in the touchscreen file, they will display in the
language that they were created in.
Lets you change the User or Admin password, if allowed.
Lets you recalibrate the Equipment Touch by touching targets. The device is
calibrated in the factory, but time, temperature, or handling could affect the
calibration. Recalibrate the screen if you touch it in one location and it responds as
if you touched it in another.
Equipment Touch Carrier Proprietary and Confidential CARRIER CORPORATION ©2014
Rev. 4/9/2014 All rights reserved
17
To Next Page
Loading...
