Remote NTC atmospheric probe
NTC duct probe
- 2 - - 35 -
A.- Separe the front panel from the rear by pressing down
on the tab on top of the thermostat.
Please read this manual carefully before installaton and use
2 .- Installation instructions
1.- General features and Accessories.
2.- Installation instructions.
3.- Sizes.
4.- Electrical conections.
5.- Micro switches.
6.- Operating manual.
7.- Technical Adjustments.
8.- Wiring Diagrams.
CONTENTS
Temperature range
Marking
Inflammability
Inlet temperature
Weight
1.- General Features
from 10 ºC to 35 ºC
CE
UL94V-0
Sonda 50 K a 25 ºC
0.125 Kg
(*) .-
See availability
50 K
50 K
1.- Accesories (*)
FREE VOLTAGE CONTACT UNITS
AND ELECTRICAL HEATERS
FREE VOLTAGE CONTACT UNITS
K1
K2
K3
K4
K5
K6
B4
PL
B3
PL
B2
PL
B1
PL
PA1/PA2
B1
B2
EE
101
THERMOSTAT
TERMINALS
102
K1
K2
K3
K4
K5
K6
B4
PL
B3
PL
B2
PL
B1
PL
PA1/PA2
B1
B2
EE
101
THERMOSTAT
TERMINALS
102
ALARMS: INTERCONNECTION BETWEEN THE THERMOSTAT AND THE UNITS WITH MASTER LINK-I
ONLY VALID FOR WIRING DIAGRAMS: REF.-ETN01-02-03-04-05-06-07-08-13-14-15 AND 16