2
STANDARD FEATURES
S High efficiency ECM (electronic commutating motor) X--13 motors -- all sizes
S Integrated motor controls have replaced integrated circuit board
S Large, grooved tube, louvered fin coils
S Efficient, quiet, time--tested blower housings and diffusers
S Sturdy, drainable condensate pans
S Cabinet construction features innovations designed to prevent cabinet sweating
S Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
S Super--thick R--4.2 insulation with vapor barrier
S Pre--painted galvanized steel cabinet (taupe metallic)
S Cabinet design meets stringent regulations for 2% cabinet leakage rate when tested at 1.0 inches static pressure
S Installation--flexible, multipoise units
S Horizontal hanging provisions on cabinet
S No tools required to service filter
S Factory--supplied, cleanable and reusable filter
S Newly improved filter rack area filter door insulation added for improved air seal
S Factory--installed heater packages available (5-- through 15--kW)
S 3-- through 30--kW accessory heaters -- field installed
S Factory--supplied power plug
S Easy plug--in provisions for heater installation
S Entry options for high and low voltage wiring hook--up
S Simple, 5--amp blade fuse (and a spare) to protect 40 VA transformer
S Easy coil inspection (removable, snap--in plug on A--coil models)
S Leak--preventing sweat connections
S Modular cabinets available on 037 through 061 sizes.
S Designed for manufactured housing applications.
ADDITIONAL FEATURES
FX4D
S Puron, environmentally sound refrigerant
S Factory--installed Puron refrigerant thermostatic expansion valves (TXV)
S Factory--installed heater packages available
S ArmorCoatt coil protection available
FX4D
To Next Page
Loading...
Need help?
General
