OMD Technical Note TN20005
Carrier Fire & Security
8 Newmarket Court, Page 11 of 11
Chippenham Drive,
Kingston, Milton Keynes, MK10 0AQ
Ensure:-
The Alarm and Pre-Alarm level settings are correct,
The Detector is NOT Isolated,
On the Control Panel select Main Menu > 1. User > 1. System Status > 2. Detector > 3.
Detector Faults. Select the required Engine and Detector to access the Detector Fault Status
Screen.
Ensure:-
There are NO active Faults shown.
If any Faults are indicated, please take appropriate actions to clear the indication(s).
For further information or technical questions please send your enquiry to
our Technical Support Team at technical@emsgroup.co.uk
To Previous Page
Loading...
