6
THERMOSTAT AND ZONING CONTROL OPTIONS
NON---PROGRAMMABLE THERMOSTAT SELECTION
TSTATCCNAC01---C
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover
TSTATCCNHP01---C* For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover
TSTATCCN2S01---C* F or use with 2 speed Air Conditioner --- _F/_C, Auto Changeover
* Model HP & 2 Stage thermostat must be field converted to air conditioner operation.
PROGRAMMABLE THERMOSTAT SELECTION
TSTATCCPAC01---B
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
TSTATCCPHP01 ---B*
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
TSTATCCP2S01---B*
For use with 2 speed Air Conditioner --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
TSTATCCSAC01
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
5 --- 2 P r o g r a m m a b l e
TSTATCCPDF01 ---B{
F o r u s e w i t h m u l t i --- s t a g e a p p l i c a t i o n s --- _F/_C, Auto Changeover,
7 --- D a y P r o g r a m m a b l e
TSTATCCPRH01---B}
F o r m u l t i --- u s e / s t a g e c o n f i g u r a t i o n s --- _F/_C, Auto Changeover
7 --- D a y P r o g r a m m a b l e
SYSTXCCUID01---B
Infinityt user interface
* Model HP & 2 Stage thermostat must be field converted to air conditioner operation.
{ Hybrid Heat™ thermostat is used with furnace an d h eat pump application.
} Thermidistat can be configured for heating, cooling, and Hybrid Heat applications. It must be configured for each specific application.
ZONING CONTROL SELECTION
ZONECC3Z(AC/HP)01 WeatherMaker Two---Zone Kit
ZONECC2KIT01---B C o m f o r t Z o n e I I --- B 2 --- Z o n e K i t
ZONECC4KIT01---B C o m f o r t Z o n e I I --- B 4 --- Z o n e K i t
ZONECC8KIT01---B C o m f o r t Z o n e I I --- B 8 --- Z o n e K i t
SYSTXCCUIZ01---B Infinity Zone User Interface
SYSTXCCRRS01 Infinity Remote Room Sensor
SYSTXCCSMS01 Infinity Smart Sensor
SYSTXCC4ZC01 Infinity 4 ---Zone Damper Control
58MVC
To Next Page
Loading...
