27
A12108
9.3. Temperature Control Status
The Temperature Control Status allows you to take a quick look at the actual temperatures, and
temperature set points for each zone in your system.
• When you are done looking at your zone status, press DONE.
The system will indicate which mode is running by showing flashing arrows towards either the
heating or cooling set point. For a zoned system, the system shows flashing arrows for each
zone currently being conditioned. If the system is preparing for the next program period, an
indicator will be displayed to show that the system is moving the temperature toward the next
programmed set point. In zoned systems with the simultaneous heat cool demand auto mode
active, the system will show a single arrow towards either the heating or cooling set point for
each zone pending conditioning in the other mode.
A160187
To Next Page
Loading...
