Carrier Infinity SYSTXCCITC01-C User Manual

ventil
Installation Instructions
NOTE: Read the entire instruction manual before starting the
installation.
NOTE: Please refer to the literature provided with the connected HVAC
equipment for more details on system operations with specific pieces of
equipment.
The features and functions outlined in the Installation Instructions reflect
Version 1.3 or later software. See the Infinity System Control product
page on the HVACPartners.com website or the Downloads section of the
www.MyInfinityTouch.Carrier.com website for the latest software
release and literature.
US Patents: Carrier U.S. Pat No. 7,243,004, U.S. Pat No. 7,775,452,
pointSET™ U.S. Pat No. 7,415,102
SYSTXCCITC01-C,
SYSTXCCWIC01-B,
SYSTXCCICF01-B,
SYSTXCCWIF01-B
Infinity® System Control
A210174
A170203A
A180218C

Carrier Infinity SYSTXCCITC01-C Specifications

General

Product Type	Thermostat
Series	Infinity
Model	SYSTXCCITC01-C
Display	Color touchscreen
Wi-Fi	Yes
Mobile App	Yes
Energy Reports	Yes
Humidity Control	Yes
Color	White
Programmability	7-day programmable
Connectivity	Wi-Fi
Power	24 VAC
Indoor Air Quality	Yes
Alerts	Yes
Warranty	5-year limited warranty
Compatibility	Infinity System
Voice Control	Amazon Alexa
Power Source	24V
Control	Touchscreen

Summary

Safety Considerations

Introduction to the Infinity System

Quick Start Guide

Set Time and Date

Manually set or synchronize time and date, and configure time zone settings for the system.

Installation Procedures

Installation Overview

Covers installation of the Infinity System Control, component installation, and system setup/commissioning.

Optimal Location Guidelines

Guidance on optimal placement for the Wall Control, Remote Room Sensors, and Smart Sensors.

Wiring Considerations

Recommendations for thermostat wire, shielded cable, ABCD bus wiring, and wire gauge.

System Control Mounting

Detailed steps for mounting the Infinity System Control, including power off and wire routing.

Accessory Connections

Instructions for connecting humidifiers and ventilators to the Infinity System.

System Commissioning

Indoor and Outdoor Unit Identification

Control searches for and identifies indoor/outdoor units, prompting for selection and configuration.

Indoor Evaporator and Heater Selection

Selects installed indoor evaporator coil and electric heater size if applicable.

Zone Identification and Setup

Identifies system zones and assigns smart sensors to their respective zones.

Equipment Summary and Airflow Check

Displays equipment summary and performs airflow verification.

Duct Assessment for Zoned Systems

Measures ductwork size and dampers to control airflow in zoned systems.

Service Menu Operations

Equipment Summary

Shows installed equipment details: indoor/outdoor units, filter, accessories, zones.

Thermostat Setup

Configures thermostat parameters including Auto Mode and Heat/Cool Deadband.

Fan Coil Setup

Sets fan coil parameters including airflow, altitude, and dehumidification options.

Furnace Setup

Sets furnace parameters including airflow, staging, and off delay.

AC/Heat Pump Setup

Sets AC/Heat Pump parameters like latching, lockout, and low ambient cooling.

Zoning System Setup

Configures zoning system settings like disabling zones, zone offsets, and airflow limits.

Equipment Checkout Tests

Performs tests on electric heat, furnace, AC, heat pump, humidifier, ventilator, and zoning.

Service Information and Diagnostics

Accesses fan coil, furnace, AC, HP, Geo HP, zoning status, and diagnostic information.

Model and Serial Number Identification

Displays model, serial numbers, and software version for all system components.

Refrigerant Charging Procedures

Refrigerant Charging

Guides proper refrigerant charging by setting lineset length, vapor line diameter, and weighing in.

Pump Down and Evacuation

Assists in pump down and evacuation procedures for inverter-controlled systems and heat pumps.

EXV Position Monitoring

Allows setting the EXV position and monitoring the suction pressure.

Wireless Network Setup

Wi-Fi Connection Setup

Establishes Wi-Fi connectivity by setting up the wireless access point SSID and password.

Wiring Diagrams

Universal Four-Wire Connection

Illustrates the universal four-wire connection for user interface and system components.

Zoning System Wiring

Shows zoning connection diagrams for various indoor units with communicating outdoor units.