Carrier Infinity SYSTXCCWIC01-B - Photo Upload and Heat Source; Uploading Personal Photos

55
14. Photo Upload for Series B
With the Infinity System Control, you can upload a personal photo to act
as a screen saver. Select the PHOTO UPDATE icon from the menu
screen.
NOTE: Use a 4GB to 32GB micro SD memory card. The card should be
formatted for FAT32 (rather than FAT64 or exFAT) in order to be read by
the control.
A170238C
• Use the PC application to upload the photo on the control and save it
to a standard micro SD card. Go to https://www.MyInfinityTouch.com
and select the Infinity System Control and click the downloads tab to
download the MyInfinity computer Desktop application for either PC
or MAC. Install the software on your computer, then go to the Menu
and select Photo Export. Follow the instructions on-screen in the PC
application.
• Touch the upload photo icon on the menu screen on the Infinity
System Control.
• Place the micro SD card into the micro SD card port on the bottom of
the Infinity System Control when prompted.
• The Control will automatically upload the photo.
• Once complete, you will receive a confirmation that your photo is
loaded.
• After you have selected your desired reminders, touch SAVE.