Installation & Commissioning Manual:
Neos 100S, 20X, 30S, 35X, 40X, 50X
62-11165 Rev D
®
18
Electrical Connections
Make all required electrical connections.
Note that most are connectors that are “plug
and play”. The required electrical
connections are listed as follows:
If required, route the Return Air Sensor
(RAS) and mount to the evaporator fan inlet.
Evaporator Connections:
• Evaporator fan motor(s)
• Return Air Sensor (RAS)
• BPV (quench valve)
• Low Pressure switch
Engine Compartment:
• CLHR (road clutch)
• BBT (quench thermostat)