2 Specifications subject to change without notice. IM-KSAIC03-02
DIMENSIONS
Fig. 2 —24V Interface Structure Size
CLEARANCES
Table 3 — 24V Interface Clearance Dimensions
Fig. 3 —Clearances
The wiring should adapt to the wire control current.
Otherwise, electric leakage or overheating may occur and result in a
fire.
The specified cables shall be used in the wiring. No external force
may be applied to the terminal. Otherwise, the wire may be damaged
and heating may occur and result in a fire.
WARNING
The shielded wire must be grounded. Sensor connecting cable should
not be longer than 23ft. (7m). The control box operates on low
voltage circuit loops. DO NOT connect a 220V or 380V cable to the
circuit loop.
CAUTION
(32mm)
6.9”
(176mm)
0.6”
(15mm)
7.8”
(200mm)
11.1”
(283mm)
2.5”
(63mm)
Clearances
Unit Minimum Value In (mm)
Sides 5.9 (150)
Front 24 (610)*
Top and Bottom 3 (76.2)
To Next Page
Loading...
