– 224 –
Cabinet
(continued)
No. Part to be replaced Work procedure Remarks
1
8) Remove the hook of the protective plate (side) from
the hole of the middle partition plate.
(2 locations)
8) Protective plate (side)
8) Remove the hook of
the protective plate
(side) from the hole
of the middle partition
plate (2 locations)
Hook
Service panel
2. Attachment
Carry out installation by following the detachment
procedure in reverse (10) → 1)).
Be careful of the hooks provided on the suction cabinet,
service panel and lower cabinet.
To Next Page
Loading...
