– 95 –
1 Push and hold the TIME and buttons at the same time for more than 4 seconds.
At first, the line 1 and CODE No.
AC (Address Change) are indicated on the LCD display.
(Select an outdoor unit.)
2 Push
UNIT LOUVER
the (left side of the button) and
SWING/FIX
buttons repeatedly to select a system
address.
3 Push the button to confirm the system address selection.
• The address of an indoor unit connected to the selected refrigerant line is indicated on the LCD display
and its fan and louvers are activated.
4 Push the
UNIT LOUVER
button (left side of the button). Each time you push the button, the indoor
unit numbers of the selected refrigerant line are indicated one after another.
• Only the fan and louvers of the indicated indoor unit are activated.
To select another system address
5 Push the button to return to step 2.
• After returning to step 2, select another system address and check the indoor unit addresses of the line.
6 Push the button to finish the procedure.
Changing the indoor unit address using a remote controller
To change an indoor unit address using a wired remote controller.
The method to change the address of an individual indoor unit (the indoor unit is paired
with a wired remote controller one-to-one), or an indoor unit in a group.
(The method is available when the addresses have already been set automatically.)
(Execute it while the units are stopped.)
1 Push and hold the , , and buttons at the same time for more than 4 seconds.
(If 2 or more indoor units are controlled in a group, the first indicated UNIT No. is that of the head unit.)
2 Push the
UNIT LOUVER
button (left side of the button) repeatedly to select an indoor unit number to
change if 2 or more units are controlled in a group. (The fan and louvers of the selected
indoor unit are activated.)
(The fan of the selected indoor unit is turned on.)
3 Push the TEMP. / buttons repeatedly to select
1313
1313
13 for CODE No..
3
5
8
1
4
2, 6, 7
ON / OFF
TEMP.
TIME
SET CL
FILTER
RESET
TEST
TIMER SET
CODE No.
UNIT No.
SETTING
DATA
SET
R.C. No.
Finish
To Next Page
Loading...
