Carrier NSB-LDT4-PS-BB

To Next Page

Specifications subject to change without notice.

1 of 8

Catalog No. 11-808-639-01

Water Leak Detector

Installation and Troubleshooting

#26268 – 02/28/2020

Overview

The Water Leak Detector is designed to sense the presence of water and alert a central monitoring system of the

potentially destructive situation. Upon water detection, an alarm relay changes state, and a local red LED illuminates.

The transmitter can be set for latching alarm or non-latching alarm with normally energized or de-energized operation.

An optional remote water sensor is available for small inaccessible locations such as AHU pans or under floor water

detection.

Figure 2:

Water Leak Detector (above) with

Remote Spot Sensor (right) and

10 ft. FEP cable

Part #NSB-LDT4-RS10-BB

Water Leak Detector (above) with

Water Rope Sensor (below)

Part #s:

Figure 1: NSB-LDT4-RR10-BB (10 ft. rope)

Water Leak Detector with NSB-LDT4-RR25-BB (25 ft. rope)

Internal Sensor Probe NSB-LDT4-RR50-BB (50 ft. rope)

Part #NSB-LDT4-PS-BB NSB-LDT4-RR100-BB (100 ft. rope)

Need help?

Do you have a question about the Carrier NSB-LDT4-PS-BB and is the answer not in the manual?

Carrier NSB-LDT4-PS-BB Specifications

General