5
ACCESSORIES
Part Number Used With Notes
1llACVB1010CDAGK
KGAVT0701CVT See Venting Tables 1
KGAVT0801CVT See Venting Tables 1
KGAVT0101BRA See Venting Tables 1, 2
KGAVT0201BRA See Venting Tables 1, 2
Part Number Used With Notes
7llAPFC1020THAGK
-llAPFC1010THAGK
-llACVP0110DAAGK
KGACK0101HCK All DV Horizontal -
6llA1000-809P
Part Number Used With Notes
-llALLA1020BSAGK
-llALLA1010ADAGK
-llALLA1020ADAGK
-llALLA1030ADAGK
KGARP0301B14 14.2" Wide Furnaces 7
KGARP0301B17 17.5" Wide Furnaces 7
KGARP0301B21 21" Wide Furnaces 7
KGARP0301B24 24.5" Wide Furnaces 7
KGAAD0101MEC 20"x25" IAQ Devices 7
KGAAD0201MEC 24"x25" IAQ Devices 7
Part Number Used With Notes
KGANP51012SP All
-
KGAPN43012SP All
-
KGAHA0150N42 All 4, 6
KGAHA0250N43 All 4, 6
4llA44N0530AHAGK
4llA54N0540AHAGK
4llA64N0550AHAGK
4llA74N0551AHAGK
4llA84N0561AHAGK
KGAHA0650P54 All 4, 6
4llA55P0570AHAG
K
KGAHA0850P56 All 4, 6
KGAHA5750125 All 4, 6
KGAHA5750130 All 4, 6
Part Number Used With Notes
KGATW0701HSI
060-14, 080-16,
080-20, 100-16,
100-20, 120-22
-
-llAB-10TIK8CCENOZ
-llAB-10TIK4CCENOZ
-llAB-10TIK2CCENOZ
-llAA-10HRP-PT
-llA10CAP-PT/10PHP-PT
-llAPXE
-PT
-llA10HRN-PT
-llA10CAN-CT/10PHN-PT
Part Number Used With Notes
5llARFU6031FWAGK
5llARFU6051FWAGK
EXPXXFIL0016 EZXCAB--1016 3, 5
EXPXXFIL0020 EZXCAB--1020 3, 5
EXPXXFIL0024 EZXCAB--1024 3, 5
EXPXXUNV0016 EZXCAB--1016 3, 5
EXPXXUNV0020 EZXCAB--1020 3, 5
EXPXXUNV0024 EZXCAB--1024 3, 5
FILXXCAR0016 FILCABXL1016 3, 5
FILXXCAR0020 FILCABXL1020 3, 5
FILXXCAR0024 FILCABXL2024 3, 5
PGAPXX1625 Up to 1600 CFM 5, 7
PGAPXX2025 Up to 2000 CFM 5, 7
PGAPAXXCAR1625 GAPAAXCC1625 5, 7
PGAPAXXCAR2025 GAPAAXCC2025 5, 7
Notes:
2. Not for use with Concentric Vent Termination Kits.
3. Last 2 digits of Part Number indicate filter size.
4. Last 2 digits of Part Number indicate orifice size.
5. Choose IAQ/filter assembly appropriate for the designed system airflow and static pressure. Use optional IAQ Device Duct Adapters as required.
6. Available from Replacement Components group.
7. Kit coming soon. Expected availability 2Q2012.
1. CSA requires that a termination kit be used. See latest PD for pipe and kit size selection. The qualified installer or agency must use only factory-authorized
kits when modif
in
these furnaces.
Carrier Performance Air Purifier
16 x 25
20 x 25
Carrier Performance Air Purifier Replacement Filter
16 x 25
20 x 25
Cartridge Media Filter
16-in.
20-in.
24.in.
EZ-Flex Filter with End Caps
16-in.
20-in.
24-in.
Filter Pack (6 pack) - Washable
16 x 25 x 1
24 x 25 x 1
EZ-Flex Filter
16-in.
20-in.
24-in.
IAQ Accessories
edge™ Programmable Thermostat (HP or AC) / (AC only)
edge™ ExP® Card for Programmable Thermostats
edge™ Non-Programmable Relative Humidity Thermostat
edge™ Non-Programmable Thermostat (HP or AC) / (AC only)
Comfort Zone II: 8-Zone System Kit
Comfort Zone II: 4-Zone System Kit
Comfort Zone II: 2-Zone System Kit
edge™ Programmable Relative Humidity Thermostat
Twinning Kit
#54 LP
#55 LP
#56 LP
1.25 mm LP
1.30 mm LP
Control Accessories
Gas Cnv Kit - LP to Nat; Two-stage
Gas Orifice Kit
#42 Natural Gas
#43 Natural Gas
#44 Natural Gas
#45 Natural Gas
#46 Natural Gas
#47 Natural Gas
#48 Natural Gas
Gas Conversion Accessories
Gas Cnv Kit - Nat to LP; Two-stage
Return Air Base (Upflow applications) - Painted
14.2-in. wide
17.5-in. wide
21-in. wide
24.5-in. wide
IAQ Device Duct Adapters (side return) - Painted
20-in IAQ to 16-in side return
24-in IAQ to 16-in side return
Furnace Base Kit for Combustible Floors
Coil Adapters Kits - Painted
No Offset
Single Offsett
Double Offset
Condensate Drainage Accessories
Freeze Protect Kit - Heat Patch for Drain Trap
Freeze Protect Kit - Heat Tape
CPVC to PVC Drain Adapter - 1/2-in. CPVC to 3/4-in. PVC
Horizontal Trap Grommet for Direct Vent Applications
Condensate Neutralizer Kit
Venting Accessories
Vent Kit - Through the Cabinet
Vent Terminal - Concentric
2-in.
3-in.
Vent Terminal Bracket
2-in.
3-in.
Ductwork Adapter Accessories
59TP5A
To Next Page
Loading...
