Holding the temperature
Here's how to override your programmed temperature settings and hold
the temperature at a specific setting without the temperature changing
during the next programmed period.
1. Open the door. w_c_
2. Press the schedule button at the top. The arrow will
move to the word hold under the button.
OOOOOO
3. The screen displays the set temperature in the lower
right. To change that temperature, press the up or
down button on the right. The temperature will stay at o
the setting you selected until you release the hold.
000000
4. To change the heating temperature when the cooling
temperature is displayed - and vice versa - press the mode
button at the top of the screen until the arrow moves to your o
choice - heat or cool. Then press the up or down button
on the right to reach your desired temperature setting, oooooo
5. To return the temperature to the pre-set level for that time period,
press the mode button until the arrow moves to follow schedule.
6. Close the door.
i
To Next Page
Loading...
Need help?
General
